Phosphine‐mediated Highly Enantioselective Spirocyclization with Ketimines as Substrates

Phosphine‐catalyzed enantioselective annulation reactions involving ketimines are a daunting synthetic challenge owing to the intrinsic low reactivity of ketimine substrates. A highly enantioselective [3+2] cycloaddition reaction that makes use of isatin‐derived ketimines as reaction partners was developed. Notably, both simple and γ‐substituted allenoates could be utilized, and various 3,2′‐pyrrolidinyl spirooxindoles with a tetrasubstituted stereocenter were obtained in excellent yields and with nearly perfect enantioselectivity (>98 % ee in all cases).     

Understanding Complex Electrochemical Impedance Spectroscopy in Corrosion Systems Using in‐situ Synchrotron Radiation Grazing Incidence X‐ray Diffraction

The difficulty in interpreting electrochemical impedance spectroscopy (EIS) data has limited the potential of the method despite its utility as an electrochemical method for studies of electrode reactions and interfacial structures. Taking the test case of the carbon dioxide corrosion of carbon steel, in‐situ synchrotron radiation grazing incidence X‐ray diffraction (SR‐GIXRD) has been demonstrated to be a powerful technique for validating and understanding the interfacial structures associated with complex EIS data. Carbon dioxide corrosion was found to occur in several steps, which may only be surmised by EIS, but the use of SR‐GIXRD in conjunction with EIS has enabled the establishment of a link between EIS time constants and structural changes associated with the evolution of corrosion products with time. By comparison to previous studies by the authors and others in this field, this communication provides the first direct experimental evidence linking SR‐GIXRD surface compositional data to otherwise indistinctive EIS time constants.     

Electrons Mediate the Gas‐Phase Oxidation of Formic Acid with Ozone

Gas‐phase reactions of CO₃^.? with formic acid are studied using Fourier transform ion cyclotron resonance (FT‐ICR) mass spectrometry. Signal loss indicates the release of a free electron, with the formation of neutral reaction products. This is corroborated by adding traces of SF₆ to the reaction gas, which scavenges 38 % of the electrons. Quantum chemical calculations of the reaction potential energy surface provide a reaction path for the formation of neutral carbon dioxide and water as the thermochemically favored products. From the literature, it is known that free electrons in the troposphere attach to O₂, which in turn transfer the electron to O₃. O₃^.? reacts with CO₂ to form CO₃^.?. The reaction reported here formally closes the catalytic cycle for the oxidation of formic acid with ozone, catalyzed by free electrons.     

Optical gain of interdiffused GaInNAs/GaAs quantum wells

A self-consistent model for the band structure and optical gain spectra in interdiffused Ga_xIn_1-xN_0.04As_0.96/GaAs single quantum wells are studied theoretically using Fick’s Law and the Fermi Golden Rule. Due to quantum-well interdiffusion, the peak gain and its peak vary with the annealing time. Our results show that the interdiffusion technique can be used to tune the operation wavelength for multi-wavelength applications without degradation of device performance. Received: 18 April 2001 / Accepted: 19 September 2001 / Published online: 20 December 2001     

Wavelength and power monitoring of DWDM systems using scanning F–P filter calibrated with a F–P laser

A novel technique to overcome the long-term drift and hysteresis of a scanning Fabry–Perot filter was developed and applied to wavelength and power monitoring of DWDM system. By using the comb peaks generated by a temperature-stabilized, near threshold-biased Fabry–Perot diode laser as wavelength reference for the scanning Fabry–Perot filter, wavelength and power measurement accuracy of better than ±10 pm and 0.2 dB, respectively, were achieved.     

An automated system for the determination of fluoride

A procedure is reported for the automated determination of fluoride by the method of standard addition. Additions of standard are made via a peristaltic pump and the amounts of standard added are computed from the change in weight of the standard in its container on a digital electronic balance.     

Determination of arsenic and antimony in biological materials by solvent extraction and neutron activation

Arsenic and antimony in digested biological samples can be extracted with pyrrolidinecarbodithioate at pH 1 into chloroform and stripped with nitric acid for neutron-activation analysis (NAA). The extraction method eliminates interferences from matrix species, including Br and Na, making the accurate determination of low levels of As and Sb in biological materials feasible. The detection limits under the experimental conditions used are 0.005 and 0.006 mug/g for arsenic and antimony, respectively. A comparison of the results obtained for As and Sb in NBS biological standards by this method and by non-destructive instrumental neutron-activation analysis (INAA) is also given.     

One-pot preparation and uranyl adsorption properties of hierarchically porous zirconium titanium oxide beads using phase separation processes to vary macropore morphology

A simple and engineering friendly one-step process has been used to prepare zirconium titanium mixed oxide beads with porosity on multiple length scales. In this facile synthesis, the bead diameter and the macroporosity can be conveniently controlled through minor alterations in the synthesis conditions. The precursor solution consisted of poly(acrylonitrile) dissolved in dimethyl sulfoxide to which was added block copolymer Pluronic F127 and metal alkoxides. The millimeter-sized spheres were fabricated with differing macropore dimensions and morphology through dropwise addition of the precursor solution into a gelation bath consisting of water (H(2)O beads) or liquid nitrogen (LN(2) beads). The inorganic beads obtained after calcination (550 °C in air) had surface areas of 140 and 128 m(2) g(-1), respectively, and had varied pore architectures. The H(2)O-derived beads had much larger macropores (5.7 μm) and smaller mesopores (6.3 nm) compared with the LN(2)-derived beads (0.8 μm and 24 nm, respectively). Pluronic F127 was an important addition to the precursor solution, as it resulted in increased surface area, pore volume, and compressive yield point. From nonambient XRD analysis, it was concluded that the zirconium and titanium were homogeneously mixed within the oxide. The beads were analyzed for surface accessibility and adsorption rate by monitoring the uptake of uranyl species from solution. The macropore diameter and morphology greatly impacted surface accessibility. Beads with larger macropores reached adsorption equilibrium much faster than the beads with a more tortuous macropore network.